Crankshaft Main Bearing

Crankshaft Main Bearing Bore Out-of-Round 0.050 mm (0.002 in.)
Crankshaft Main Bearing Clearance #1 -
Production 0.02-0.05 mm (0.0008-0.0020 in.)
Crankshaft Main Bearing Clearance #2, #3, and #4 -
Production 0.028-0.058 mm (0.0011-0.0023 in.)
Crankshaft Main Bearing Clearance #1 -
Service 0.0254-0.05 mm (0.0010-0.0020 in.)
Crankshaft Main Bearing Clearance #2, #3, and #4 -
Service 0.025-0.063 mm (0.0010-0.0025 in.)

Crankshaft Bearing Cap Bolt
First Pass 20 Nm (15 lb ft.)
Final Pass 73 degrees