Transmission Front Case Disassemble

Transmission Front Case Disassemble





1. Using a 13 mm wrench, remove the 7 screws from the bearing retainer.





2. Using a screwdriver, remove the gear train cup.





3. Remove the gear train adjustment shims.





4. Remove the gear train spacer.





5. Using a punch and a hammer, remove the drive shaft cup.





6. Remove the drive shaft adjusting shims.





7. Using a 10 mm wrench, remove the 2 screws from the anchor support assembly.





8. Remove 3 anchor bushings and 3 springs, 2 pistons and anchor bolt.





9. Using a 13 mm wrench, remove 2 screws from the oil baffle.