Fan Pulley Replacement

Fan Pulley Replacement

Removal Procedure





1. Remove the drive belt. Refer to Drive Belt Replacement Service and Repair.

2. Remove the fan clutch. Refer to Fan Clutch Replacement (Diesel) .

3. Disconnect the camshaft position (CMP) sensor electrical connector.





4. Remove the fan pulley bolts/nuts.

5. Remove the fan pulley.

Installation Procedure





1. Install the fan pulley.

Caution:
Refer to Fastener Caution Fastener Caution.

2. Install the fan pulley bolts/nuts.

Tighten the bolts/nuts to 41 Nm (30 lb ft).





3. Connect the CMP sensor electrical connector.

4. Install the fan clutch. Refer to Fan Clutch Replacement (Diesel) .

5. Install the drive belt. Refer to Drive Belt Replacement Service and Repair.