Removal and Replacement

Throttle Body Assembly Replacement

Removal Procedure





1. Remove the air cleaner outlet resonator. Refer to Air Cleaner Outlet Resonator Replacement Service and Repair.

2. Disconnect the engine wiring harness electrical connector (2) from the throttle body.





3. Remove the throttle body bolts.

4. Remove the throttle body and gasket. Discard the gasket.

Installation Procedure





1. Install a NEW throttle body gasket into the upper intake manifold.

2. Place the throttle body onto the upper intake manifold.

Caution:
Refer to Fastener Caution Fastener Caution.

3. Install the throttle body bolts and tighten to 10 Nm (89 lb in).





4. Connect the engine wiring harness electrical connector (2) to the throttle body.

5. Install the air cleaner outlet resonator. Refer to Air Cleaner Outlet Resonator Replacement Service and Repair.

6. Perform the throttle learn procedure. Refer to Throttle/Idle Learn Testing and Inspection.