Overhaul Procedure Steps

NOTE: This article lists the sequential steps necessary to overhaul the transmission.
^ For the specific step listed below, refer to that step under "Repair Instructions". Repair Instructions

1. Transmission Disassemble
2. Main Shaft Disassemble
3. Shift Shaft and Fork Assemblies Disassemble
4. Reverse Idler Gear Disassemble
5. Counter Gear Shaft Disassemble
6. Clutch Housing Disassemble
7. Gears and Shafts Cleaning and Inspection
8. Bearings and Spacers Cleaning and Inspection
9. Clutch Housing Assemble
10. Counter Gear Shaft Assemble
11. Main Shaft Assemble
12. Shift Shaft and Fork Assemblies Assemble
13. Transmission Assemble