Fan Pulley Replacement

Fan Pulley Replacement

Removal Procedure





1. Remove the drive belt. Refer to Drive Belt Replacement .

2. Remove the fan clutch. Refer to Fan Clutch Replacement (Diesel) .

3. Disconnect the camshaft position (CMP) sensor electrical connector.





4. Remove the fan pulley bolts/nuts.

5. Remove the fan pulley.

Installation Procedure





1. Install the fan pulley.

Caution:
Refer to Fastener Caution Fastener Caution.

2. Install the fan pulley bolts/nuts.

Tighten the bolts/nuts to 41 Nm (30 lb ft).





3. Connect the CMP sensor electrical connector.

4. Install the fan clutch. Refer to Fan Clutch Replacement (Diesel) .

5. Install the drive belt. Refer to Drive Belt Replacement .