Generator Battery Jumper Cable Replacement

Generator Battery Jumper Cable Replacement (Diesel)

Removal Procedure





1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (TP2) Battery Negative Cable Disconnection and Connection (TP2)Battery Negative Cable Disconnection and Connection (Single Battery) Battery Negative Cable Disconnection and Connection (Single Battery).

2. Remove the mega fuse block nut (1).

3. Remove the battery positive cable (3) and the generator jumper cable terminal (2), from the mega fuse block.





4. Remove the generator nut (1).

5. Remove the generator jumper cable from the vehicle.

Installation Procedure





Caution:
Refer to Fastener Caution Fastener Caution.

1. Install the generator jumper cable (2) to the generator with the nut (1) and tighten to 9 Nm (80 lb in)





2. Install the generator jumper cable terminal (2) and the battery positive cable (3), to the mega fuse block.

3. Install the mega fuse block nut (1) and tighten to 9 Nm (80 lb in)

4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (TP2) Battery Negative Cable Disconnection and Connection (TP2)Battery Negative Cable Disconnection and Connection (Single Battery) Battery Negative Cable Disconnection and Connection (Single Battery).