Input Carrier Bushing Replacement

Input Carrier Bushing Replacement

Tools Required

* J 43781 Input Carrier Bushing Remover/Installer

* GE-8092 Driver Handle Universal Driver





Important:
The preferred method for removing/installing the input carrier bushing is to use J 43781 and a press. If a press is not available, use J 43781 and GE-8092 Driver Handle universal driver.


1. Position the input carrier assembly (3) on the press with the external splines facing up.

2. If the bushing will be removed without a press, install the short end of J 43781 (2) onto GE-8092 Driver Handle (1).

3. Using J 43781 , press or drive the bushing (4) out of the carrier.





4. If the bushing will be installed without a press, install the long end of J 43781 (2) onto GE-8092 Driver Handle (1).

5. Install a new bushing (3) onto J 43781 (2).

6. Using J 43781 , press or drive the bushing into the carrier until J 43781 (2) seats.