Transfer Case Rear Extension Bushing Replacement

Transfer Case Rear Extension Bushing Replacement

Special Tools

J-45380 - Transfer Case Rear Bushing Remover and Installer

Removal Procedure

1. Remove the rear output shaft seal. Refer to Rear Output Shaft Seal Replacement Rear Output Shaft Seal Replacement.




2. Using J-45380 - transfer case rear bushing remover and installer , remove the rear output shaft bushing.

Installation Procedure





Note: Install the bushing with the notched area facing outward and properly aligned to the rear case. Oil pick up "slot" should be straight down in the vehicle.

1. Using J-45380 - transfer case rear bushing remover and installer install the output shaft bushing, if removed or new.

2. Install the rear output shaft seal. Refer to Rear Output Shaft Seal Replacement Rear Output Shaft Seal Replacement.