Front Suspension

Wheel Stud Replacement

Tools Required

J 43631 - Ball Joint Remover

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.

2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation Removal and Replacement.

3. Remove the brake rotor. Refer to Front Brake Rotor Replacement (1500 Series) Front Brake Rotor Replacement (1500 Series)Front Brake Rotor Replacement (2500 Series) Front Brake Rotor Replacement (2500 Series).




4. Use the J 43631 - ball joint remover to press the stud from the wheel bearing/hub.

Installation Procedure




1. Install a new stud. Use washers and a wheel nut and pull the new stud into the hub.

2. Install the brake rotor. Refer to Front Brake Rotor Replacement (1500 Series) Front Brake Rotor Replacement (1500 Series)Front Brake Rotor Replacement (2500 Series) Front Brake Rotor Replacement (2500 Series).

3. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation Removal and Replacement.

4. Lower the vehicle.