Battery Replacement - Hybrid (HP2)

Battery Replacement

Removal Procedure





1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection Battery Negative Cable Disconnection and Connection.

2. Remove the radiator support diagonal brace. Refer to Radiator Support Diagonal Brace Replacement .

3. Reposition the positive battery cable insulating cover (2) from over the positive terminal.

4. Rotate the lever lock (1) counterclockwise in order to disconnect the positive battery cable.

5. Remove the positive battery cable terminal (3) from the battery.





6. Remove the battery hold down bolt (1) and hold down (3).

7. Remove the battery assembly (2).

Installation Procedure





1. Install the battery assembly (2).

Caution:
Refer to Fastener Caution Fastener Caution.

2. Install the battery hold down (3) and bolt (1) and tighten to 25 Nm (18 lb ft).





3. Install the positive battery cable terminal (3) to the battery.

4. Rotate the lever lock (1) clockwise until an audible click is heard in order to connect the positive battery cable.

5. Position the positive battery cable insulating cover (2) over the positive terminal.

6. Install the radiator support diagonal brace. Refer to Radiator Support Diagonal Brace Replacement .

7. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection Battery Negative Cable Disconnection and Connection.