Air Temperature Sensor ( Ambient / Intake ): Service and Repair

INTAKE AIR TEMPERATURE SENSOR REPLACEMENT

REMOVE OR DISCONNECT
1. Negative (-) battery cable.
2. Intake Air Temperature (IAT) sensor electrical connector.
3. IAT sensor from intake manifold.

INSTALL OR CONNECT
1 IAT sensor to intake manifold. Tighten IAT sensor to 10-20 Nm (7.5-14.0 lb. ft.).
2. IAT sensor electrical connector.
3. Negative (-) battery cable. Tighten Negative (-) battery cable-to-negative (-) battery terminal retainer to 15 Nm (11 lb. ft.).