Troubleshooting Hints

1. For checking a Speaker, use a "C" or "D" cell battery and momentarily connect and disconnect it across the circuits to that Speaker while listening for a slight popping sound or waiting for the cone of the Speaker to move m and out If either happens, the Speaker and circuitry are usually OK.
2. Check CIGAR RADIO Fuse with a fuse tester.
3. Check TAIL DOME Fuse with a fuse tester.
4. Check that G200 is clean and tight.
5. Before component replacement, check for poor connections at related component and inline harness connector terminal connections.
6. Check for a broken (or partially broken) wire inside the insulation which could cause system malfunction but prove "GOOD" in a continuity/voltage check with a system disconnected. These circuits may be intermittent or resistive when loaded, and if possible, should be checked by monitoring for a voltage drop with the system operational (under load).