Hazard Warning Lamps

Voltage is applied at all times through the HAZARD Fuse to the normally open contacts of the HAZARD SWITCH. With the HAZARD SWITCH pressed, the contacts close, and voltage is applied through the TURN/HAZARD RELAY, back through the HAZARD SWITCH, to the Turn Indicators in the INSTRUMENT PANEL CLUSTER ASSEMBLY, FRONT PARK/TURN LAMPS, and the Turn Lamps in the REAR COMBINATION LAMPS. Since the lamps are permanently grounded, the lamps light immediately and start to flash 80-90 times a minute while the solid state timing unit in the TURN/HAZARD RELAY operates.