Troubleshooting Hints - Exterior Lights

1. For inoperative Park Lamps:
^ Check the TAIL DOME Fuse with a fuse tester.
^ Check that HEADLAMP RELAY 2 connector is secure.
^ Check for an open or shorted filament within the inoperative bulb.
^ Check that grounds G100, G104, G200, G300, G400 and G402 (2-Door) are clean and tight
2. For inoperative Turn/Hazard Lamps:
^ Check the HAZARD Fuse with a fuse tester.
^ Check the TURN BACK Fuse with a fuse tester.
^ Check that the TURN/HAZARD RELAY connector is secure.
^ Check for an open or shorted filament within the inoperative bulb.
^ Check that grounds G100, G104, G200, G201, and G300 are clean and tight.
3. For inoperative Stoplamps:
^ Check the STOP HORN Fuse with a fuse tester.
^ Check that the STOPLAMP SWITCH is properly adjusted.
^ Check for an open or shorted filament within the inoperative bulb.
^ Check that grounds G300 and G400 are clean and tight.
4. Before component replacement, check for poor connections at related component and in-line harness connector terminal connections.