30000 MI or 48000 KM

Inspect/Adjust
    Valve Clearance
      1.6l engine only
    Idle Speed
      Check engine idle speed and adjust it to underhood label specifications.
Inspect
    Universal Joint, Drive/Propeller Shaft
      Inspect for looseness and damage every 15,000 miles or 15 months whichever occurs first. Inspect more frequently if used off-road or for pulling a trailer. Tighten U-joint flange bolts if necessary.
    Fuel Tank
      Inspect fuel tank, cap and lines for damage or leaks. Inspect fuel cap gasket for any damage. Replace parts as needed.
    Fuel Filler Cap
      Inspect fuel tank, cap and lines for damage or leaks. Inspect fuel cap gasket for any damage. Replace parts as needed.
    Drive/Propeller Shaft
      Inspect for looseness and damage every 15,000 miles or 15 months whichever occurs first. Inspect more frequently if used off-road or for pulling a trailer.
    Drive Belt
      Inspect engine accessory drive belts every 30,000 miles or 24 months whichever occurs first.
    Brakes and Traction Control
      Inspect the complete system. Inspect brake lines and hoses for proper hookup, binding, leaks, cracks, chafing, etc. Inspect disc pads for wear and rotors for surface condition. Also inspect drum brake linings for wear and cracks. Inspect other brake parts including drums, wheel cylinders, calipers, parking brake, etc. Check parking brake adjustment. A good time to check the brakes is when the wheels are removed for tire rotation. Brakes may need to be inspected more often if driving habits or conditions result in frequent braking.
Replace
    Spark Plug
      1.6l engine only
    Oil Filter, Engine
      Change oil and filter every 7500 miles or 7.5 months, whichever occurs first.
    Fuel Filter
      Replace every 30,000 miles or 30 months whichever occurs first. Replace sooner if clogged.
    Fluid - M/T
      Replace every 30,000 miles or 30 months whichever occurs first.
    Engine Oil
      Change oil and filter every 7500 miles or 7.5 months, whichever occurs first.
    Air Filter Element
Clean/Repack
    Wheel Bearing
      2WD only
Rotate
    Tires
Flush
    Cooling System
      Drain, flush and refill cooling system every 30,000 miles or 30 months whichever occurs first. Clean radiator, condensor, pressure cap and neck. Pressure test the cooling system and pressure cap.