Control Valve Body Assembly

REMOVE OR DISCONNECT
1. Manual detent roller and spring assembly (145).
2. Electrical connections at solenoid (147) and case (101).
3. Bolts (152) and Solenoid (147) from spacer reinforcement plate (146).
4. Solenoid (147) from the solenoid pipes (149 and 150).
5. Solenoid pipes (149 and 150) from the control valve body assembly (128) and the case.
- Check for proper fit
- Inspect O-ring seal (151) on pipes.
6. Governor pressure switch (137) using a 1-1/16 in. pressure switch socket.
7. Bolts (152), spacer reinforcement plate (146).
8. Bolts (152), servo cover (169), and gasket (168).
9. Bolts (155), control valve body assembly (128), and manual valve link (139).
10. Spacer plate (130), gaskets (129 & 132), and checkball (193).