Modulator and Detent Valve Assemblies

REMOVE OR DISCONNECT

^ Tool Required:
- J 23100 Vacuum Modulator Wrench

NOTICE: Use of another tool to remove the vacuum modulator may result in internal damage to the modulator.

1. Vacuum modulator (118) using J 23100, O-ring seal (117), and modulator plunger (116).
2. Modulator valve (115) and sleeve (114).
3. Detent valve retaining pin (112) using diagonal pliers. Insert a wire in the center of the spring pin to prevent it from collapsing during removal.
4. Detent sleeve (111) valve (110), spring seat (109) and spring (108).
5. Detent valve sleeve seal (113).