Delco (R) AM/FM Stereo Radio, Cassette Player and Clock

Delco(R) AM/FM Stereo, Cassette Player And Clock:

The ignition switch must be in the ACC or ON position for the cassette player to operate. The cassette player is designed to work best with tapes which are 60 to 90 minutes long. Tapes longer than this are thinner and may not function properly in this unit. Do not use these tapes to diagnose problems in the cassette player.

The side of the cassette with the tape visible should face to the right when inserted in the unit. If there is no sound or just a garbled sound, it may not be sifting squarely in the player. Press the (EJECT) button to remove the tape and reinsert it. Once the tape is playing, the volume, balance and fade controls function in the same manner as with the radio. The tape bias is set automatically. When a metal or chrome tape is inserted, MTL will appear on the display.

TAPE DIRECTION INDICATORS
The side of the tape being played (top or bottom) is indicated by the arrows at the far left of the display.

FAST FORWARD
Press the 3 (FF) button to rapidly advance to another part of the tape. Press the 3 (FF) or the RCL PROG button to return to normal playing speed.

NOTE: Pressing RCL PROG not only stops fast forward operation, but will also change tape side.

REWIND
Press the 1 (REW) button to rapidly reverse and return to another part of the tape. Press the 1 (REW) or the RCL PROG button to return to normal playing speed.

NOTE: Pressing RCL PROG not only stops rewind operation, but will also change tape side.

NEXT SELECTION
Press the 6 (NEXT) button to move rapidly to the beginning of the next selection. For the next selection function to operate properly, there must be three to 4 seconds of silence between selections on the tape. NEXT can be canceled by pressing either NEXT or RCL PROG.

NOTE: Pressing RCL PROG not only stops NEXT operation, but will also change tape side.

PREVIOUS SELECTION
Press the 4 (PREV) button to play the last selection again. For the previous selection function to operate properly, there must be 3 to 4 seconds of silence between selections on the tape. Previous can be canceled by pressing either PREV or RCL PROG.

NOTE: Pressing RCL PROG not only stops PREV, but will also change tape sides.

CHANGING PROGRAMS
Press the RCL PROG button to switch from one side of the tape to the other. Note arrow in graphic display.

DOLBY (R) NOISE REDUCTION
Press the 5 button to remove noise from Dolby (R) NR-encoded tapes. (Dolby Noise Reduction is manufactured under license from Dolby Laboratories Licensing Corporation. Dolby and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.)

EJECT
Press the EJECT button to remove or stop the tape and return to radio operation.

RADIO MONITOR
Press the R-M (2) button to listen to the radio when you are fast-forwarding or rewinding a cassette tape. You may only use the TUNE, SEEK and PRESET SCAN buttons while in the radio mode.

NOTE: During R-M (radio monitor) operation, the preset push buttons will not tune the radio.