Radiator Outlet Pipe

REMOVAL
1. Radiator cap.
2. Start and run engine for 15 minutes.
3. Stop the engine and open the drain plug on the radiator to drain the coolant into a suitable container.
4. Loosen and reposition radiator outlet hose clamp securing radiator outlet pipe to radiator outlet hose #1.
5. Loosen and reposition radiator outlet hose clamp securing radiator outlet pipe to radiator outlet hose #2.
6. One bolt and radiator outlet pipe from vehicle.

INSTALLATION
1. Position new hose clamps on open ends of radiator outlet hoses #1 and #2 before installation of radiator outlet pipe.
2. Radiator outlet pipe to vehicle; secure with one bolt in outlet pipe support.
^ Tighten the outlet pipe support bolt to 11 Nm (97 inch lbs.).
3. Radiator outlet hoses #1 and #2 to radiator outlet pipe; secure with hose clamps after positioning over coolant intake pipe flares.
4. Fill radiator with approved coolant.