Rear

Rear Wheel Speed Sensor And Cover:

REMOVE OR DISCONNECT
1. Right rear combination lamp assembly. Refer to Lighting and Horns.
2. Wheel speed sensor jumper to harness connector.
3. Raise and suitably support vehicle.
4. Two bolts and rear wheel speed sensor cover.
5. Wheel speed sensor electrical connector.
6. Jumper harness, including pass-through grommet, from vehicle.

INSTALL OR CONNECT
1. Jumper harness, including pass-through grommet, to vehicle.
2. Wheel speed sensor electrical connector.
3. Wheel speed sensor cover and two bolts, then tighten to 15 Nm (11 ft. lbs.).
4. Lower vehicle.
5. Wheel speed sensor jumper to harness connector.
6. Right rear combination lamp assembly. Refer to Lighting and Horns.