Negative (-) Battery Cable

REMOVE OR DISCONNECT
1. Battery from vehicle.

Battery, Cables, Carrier And Hold Down Bracket:

2. Ground bolt and negative (-) battery cable from body.
3. Ground bolt and cable from starter motor housing.
4. Cable from harness retainer near starter motor and remove cable from vehicle.

INSTALL OR CONNECT
1. Position negative (-) battery cable into vehicle.
2. Cable to starter motor housing; secure with ground bolt.
Tighten
^ Ground bolt to 23 N.m (17 lb. ft.).
3. Cable to body; secure with ground bolt.
Tighten
^ Body ground bolt to 14 N.m (124 lb. in.).
4. Route cable and secure in harness retainer near starter motor.
5. Battery into vehicle.