Coolant Bypass Hose

REMOVAL
1. Radiator cap.
2. Start and run engine for 15 minutes.
3. Stop the engine and open the drain plug on the radiator to drain the coolant into a suitable container.
4. Loosen and reposition one hose clamp at intake manifold end and one hose clamp at coolant intake pipe end of coolant bypass hose.
5. Coolant bypass hose from vehicle.

INSTALLATION
1. Position a new hose clamp on each end of coolant bypass hose before installation.
2. Coolant bypass hose to vehicle; secure with two coolant bypass hose clamps after positioning over coolant intake pipe and intake manifold flares.
3. Fill radiator with approved coolant. Refer to Cooling System.