Coolant Intake Pipe

REMOVAL
1. Radiator cap.
2. Start and run engine for 15 minutes.
3. Stop the engine and open the drain plug on the radiator to drain the coolant into a suitable container.
4. Loosen and reposition four hose clamps.
5. Two bypass hoses, radiator outlet hose #1 and heater core inlet hose from coolant intake pipe.
6. One bolt from coolant intake pipe support and coolant intake pipe from vehicle
7. O-ring seal from coolant intake pipe.

INSTALLATION
1. Position new hose clamps on open ends of two bypass hoses, radiator outlet hose #1 and heater core inlet hose before installation of coolant intake pipe.
2. New O-ring seal to coolant intake pipe.
3. Coolant intake pipe to vehicle; secure with one bolt.
^ Tighten the coolant intake pipe bolt to 11 Nm (97 inch lbs.).
4. Two bypass hoses, radiator outlet hose #1 and heater core inlet hose to coolant intake pipe; secure with four hose clamps after positioning over coolant intake pipe flares.
5. Fill radiator with approved coolant.