Resume/Accel Switch

Cruise Control Mode Switch (RESUME/ACCEL, COAST/SET & CANCEL):

The RESUME/ACCEL (Resume/Accelerate) switch, part of the cruise control mode switch, returns cruise control system operation to the last speed setting after a cancel input signal is received by the cruise control module (such as vehicle braking).

This switch is activated when the cruise control switch is momentarily rotated clockwise.

Do not hold the cruise control switch in this position. Release it immediately. If the cruise control switch is held in the RESUME/ACCEL position for more than 1 second, the system goes into the accelerate mode.

If acceleration during cruise control system operation is desired, rotate the cruise control switch to the RESUME/ACCEL position and hold it there until the vehicle reaches the desired speed. When the cruise control switch is released, the cruise control system will maintain the new cruise speed.

In order to use the accelerate mode, the CRUISE CTRL switch button must have been pressed, the CRUISE indicator must be lit, and the vehicle speed must be over 40 km/h (25 mph).