Four-Wheel Drive Low Switch (If Equipped)

REMOVE OR DISCONNECT
1. Negative (-) battery cable.
2. Raise and suitably support vehicle.
3. Four-wheel drive low switch electrical connector from four-wheel drive low switch.





4. Four-wheel drive low switch from transfer case by turning counterclockwise.

Inspect
- Four-wheel drive switch O-ring for cuts or other damage. Replace as necessary.

INSTALL OR CONNECT
1. Four-wheel drive low switch into transfer case by turning clockwise.
- Tighten four-wheel drive switch to 20 Nm (15 ft. lbs.).
2. Four-wheel drive low switch electrical connector to four-wheel drive low switch.
3. Lower vehicle.
4. Negative (-) battery cable.