Install

Figure 2

1. Washers on wheel stud and pull into position with wheel nut.

2. Remove wheel nut and washers.

3. Reluctor Ring (ABS equipped). Refer to Reluctor Ring in Antilock Brake System.

4. Wheel hub (ABS equipped). Refer to Wheel Hub and Bearing.

5. Brake rotor to wheel hub. Refer to Brake Rotor in Front Disc Brakes.

6. Locking hub (four-wheel drive models). Refer to Locking Hubs-Four Wheel Drive Models.

7. Hub end cap (two-wheel drive models).

8. Brake caliper and caliper carrier. Refer to Caliper Assembly in Front Disc Brakes.

9. Front tires/wheels. Refer to Wheel Installation in Wheels and Tires.