A/C Compressor Control - Revised Schematics
File In Section: 8 - Chassis/Body ElectricalBulletin No.: 43-81-44
Date: December, 1994
Subject:
Section 8A-64 Revised Schematics
Models:
1993-94 Geo Metro
The schematics (8A-64-0, 8A-64-1 and 8A-64-2) serve to replace the respective schematics found in Section 8A-64, HVAC: Compressor Control of the 1993 Geo Metro Service Manual (ST370-93) and the 1994 Geo Metro Service Manual (ST370-94).
The location for Connector C2O8 as stated in the Component List of page 8A-64-5 in the 1993 Geo Metro Service Manual (ST370-93) and the 1994 Geo Metro Service Manual (ST370-94) is incorrect. The correct "LOCATION" for this should read as follows: "Main Harness to Inner A/C Harness, behind RH I/P near RH Kick Panel". The Component Location Views found in Section 8A-201 are correct.