Navigation System - Serial Number Location

SOURCE:
Honda Service News April 2003

TITLE:
Where's the Navi System Serial Number?

APPLIES TO:
2003 Accord, 2000-03 Odyssey, 2003 Pilot
SERVICE TIP:
Looking for the Navi system serial number? You'll find it on a sticker underneath the Navi system control unit. You won't find it on the back of the display screen.

On 2003 Accords, you can also read the serial number right from the display screen by entering the diagnostics mode. Here's how:

1. Turn the ignition switch to LOCK (0).

2. Connect the SCS service connector (T/N 07PAZ-0010100) to the service check connector near the navi system control unit. Then turn the ignition switch to ON (II).

3. Wait several seconds for the Navi System Links screen to appear, then touch the on screen return button to get to the Select Diagnosis Items menu.

4. From the Select Diagnosis Items menu, touch the Unit Check button to get to the Navi ECU screen. You'll see the navi system serial number at the bottom of the screen. Keep in mind that the Navi ECU screen is locked while the navi control unit runs a selftest.

5. Record the navi system serial number, and then turn the ignition switch to LOCK (0). Remove the SCS service connector from the service check connector.

NOTE: Don't touch the MEM CLR button on the Navi ECU screen; this erases your customer's saved info from the control unit's memory.