Differential Installation

Differential Installation





1. Raise the rear differential a little on the transmission jack, then connect the breather tube (A) to the rear differential.
2. Apply multipurpose grease to the splines of the rear driveshafts (B), then install the rear driveshafts to the rear differential.





3. Raise the rear differential to the mounting level, then install the mounting bolts (A) and washer (B).
4. Connect the 6P (C) and 2P (D) connectors.
5. Install the rear damper.
6. Install the upper arm and the upper arm bolt to the vehicle.





7. Install the new rear differential (A) onto the propeller shaft (B), by aligning the reference mark (C). Make sure you use new mounting bolts.
8. Attach the propeller shaft to the transmission and the rear differential by aligning the reference marks.
9. Refill the differential with recommended fluid.