P1750
DTC P1750: Mechanical Problem in Hydraulic Control System of A/T Clutch Pressure Control Solenoid Valve Assemblies A and B or Problem in Hydraulic Control SystemNOTE:
^ Record all freeze data and review General Troubleshooting Information before you troubleshoot.
^ Keep these replacement solenoid valves on hand:
- A/T clutch pressure control solenoid valves A and B
1. Check whether the OBD II scan tool indicates another code.
Does the OBD II scan tool indicate another code?
YES-Perform the troubleshooting flowchart for the indicated code(s). Recheck for code P1750 after troubleshooting.
NO-Go to step 2.
2. Turn the ignition switch OFF.
3. Replace the A/T clutch pressure control solenoid valves A and B.
4. Reset the PCM memory with the PGM Tester or by removing the No. 13 fuse in the passenger's underdash fuse/relay box for more than 10 seconds. Perform the idle learn procedure. If fuse No. 13 was removed, perform the power window control unit reset procedure.
5. Drive the vehicle for several minutes in 1st, 2nd, 3rd, 4th, and 5th gears in the [D] position.
6. Recheck for code P1750.
Does the OBD II scan tool indicate code P1750?
YES-Replace the transmission.
NO-The problem has been corrected.