Mirror Holder

Mirror Holder Replacement




1. Push in the bottom of the mirror holder (A).
2. Insert a flat-tip screwdriver wrapped with a shop towel at the bottom gap between the mirror holder and mirror (B). Push the mirror holder upward to release the hooks (C, D) from the actuator adapter plate (E) while holding the mirror holder.




3. If equipped, disconnect the mirror defogger terminals (A).
4. Install the mirror holder in the reverse order of removal, and note these items:
- Make sure the terminals are plugged in properly.
- Push the mirror holder downward to lock in the hooks.
- Push in the bottom of the mirror fully before you push on the mirror holder.
- Check the operation of the actuator.