Third Row Seat-Back Recline Cable

Third Row Seat-back Recline Cable Replacement

Special Tools Required
KTC trim tool set SOJATP2014

NOTE:
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to bend the cable.

1. Remove the third row seat-back recline lever.




2. While holding the lever (A) open, carefully pry out the cover (B) with a flat-tip screwdriver to release the tabs (C), then remove the cover.




3. Disconnect the recline cables (A). There is no inner recline cable on the right recline lever.
4. Install the third row seat-back recline cable in the reverse order of removal, and make sure the cables are connected securely.