Third Row Seat-Back Recline Lever
Third Row Seat-back Recline Lever ReplacementSpecial Tools Required
KTC trim tool set SOJATP2014
NOTE:
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to bend the seat-back recline cable.
- Put on gloves to protect your hands.
1. Remove the left third row seat or right third row seat.
2. Remove the seat-back.
3. Pry out the lid (A), and remove the screws securing the third row seat-back recline lever (B).
4. Remove the back cover, then release the clips from behind the seat-back, as necessary.
5. Remove the screw and release the hook (A), then remove the outer bracket cover (B).
6. Disconnect the seat-back recline cable (A).
7. Remove the screw(s), then remove the seat-back recline lever (A) with the recline cable(s) (B).
8. Install the lever in the reverse order of removal, and make sure the recline cables are connected securely.