Brake Light Switch: Testing and Inspection
Brake Pedal Position Switch Test1. Remove the drivers dashboard lower cover.
2. Disconnect the 4P connector (A) from the brake pedal position switch (B).
3. Check for continuity between the No. 2 and No. 3 terminals.
- There should be continuity when the brake pedal is pressed.
- There should be no continuity when the brake pedal is released.
4. Check for continuity between the No. 1 and No. 4 terminals.
- There should be no continuity when the brake pedal is pressed.
- There should be continuity when the brake pedal is released.
5. If necessary, replace the switch or adjust the pedal height.