System Specifications

Crankshaft pulley





Install the crankshaft pulley, and tighten the bolt. Do not use an impact wrench.
- 1 Hold the pulley with the handle (A) and holder attachment (B), then tighten the bolt to 64 Nm (6.5 kgf-m, 47 ft. lbs.) with a torque wrench and heavy duty 19 mm socket (C).
- 2 Mark the bolt head (D) and crankshaft pulley (E) as shown, then tighten the bolt an additional 60° (The mark on the bolt head line up with the mark on the crankshaft pulley).





Timing belt tensioner

Timing cover





Install the lower cover.





Install the front upper cover (A) and rear upper cover (B).