Lower Arm A Removal & Installation
Lower Arm A Removal/Installation1. Raise the rear of the vehicle, and support it with safety stands in the proper locations. Remove the rear wheels.
2. Remove lower arm A mounting bolt (C).
3. Remove lower arm A mounting nut (D).
4. Remove lower arm A from the vehicle.
5. Install lower arm A in the reverse order of removal, and note these items:
^ Place a jack under the lower arm B, and raise the suspension to load it with the vehicle's weight.
^ Tighten all mounting hardware to the specified torque values.
^ Before installing the wheel, clean the mating surfaces of the drum in the brake disc and the inside of the wheel.
^ Check the rear wheel alignment, and adjust it if necessary.