Service Specifications

Starter for M/T (DENSO)
Commutator mica depth
Standard or New 0.5 - 0.8 mm (0.020 - 0.031 inch)
Limit 0.2 mm (0.008 inch)
Commutator runout
Standard or New 0.02 mm (0.001 inch) maximum
Limit 0.05 mm (0.002 inch)
Commutator O.D.
Standard or New 29.9 - 30.0 mm (1.177 - 1.181 inch)
Limit 29.0 mm (1.142 inch)
Brush length
Standard or New 15.0 - 15.5 mm (0.59 - 0.61 inch)
Limit 10.0 mm (0.39 inch)
Brush spring tension (new) 14 - 20 N (1.4 - 2.0 kgf, 4.0 - 5.3 lbs.)
Starter for A/T (MITSUBA)
Commutator mica depth
Standard or New 0.4 - 0.6 mm (0.016 - 0.020 inch)
Limit 0.2 mm (0.008 inch)
Commutator runout
Standard or New 0.02 mm (0.001 inch) maximum
Limit 0.05 mm (0.002 inch)
Commutator O.D.
Standard or New 28.0 - 28.1 mm (1.102 - 1.106 inch)
Limit 27.5 mm (1.083 inch)
Brush length
Standard or New 15.8 - 16.2 mm (0.62 - 0.64 inch)
Limit 11.0 mm (0.43 inch)
Brush spring tension (new) 16 - 18 N (1.6 - 1.8 kgf, 3.5 - 4.0 lbs.)
STARTER
Type Gear reduction
Hour rating 30 seconds
Direction of rotation Clockwise as viewed from gear end