Trunk Lid

Trunk Lid Replacement

NOTE: Put on gloves to protect your hands.




1. Coupe only, remove the screws, then remove the taillight lid cover (A) from each side.




2. Disconnect the taillight connectors (A), license plate light connector (B), trunk lid latch actuator connector (C), trunk lid cylinder switch connector (D) and remove trunk lid opener cable (El.
3. Detach the harness clips and connector clips (F), then remove the wire harness (G) and trunk lid opener cable from the trunk lid.




4. Remove the bolts, then remove the trunk lid.
5. Install the trunk lid in the reverse order of removal, and note these items:
- Make sure the connectors are plugged in properly, and opener cable is connected properly, and the wire harness and opener cable are routed properly.
- Make sure the trunk lid opens properly and locks securely.
- Adjust the trunk lid alignment.