With Electronic Climate Control
A/C Pressure Switch Circuit Troubleshooting1. Disconnect the A/C pressure switch 2P connector.
2. Turn the ignition switch ON (II).
3. Measure the voltage between the No.2 terminal of the A/C pressure switch 2P connector and body ground.
Is there about 5 volts?
YES - Go to step 4.
NO - Go to step 10.
4. Turn the ignition switch OFF.
5. Check for continuity between the No.1 and No.2 terminals of the A/C pressure switch.
Is there continuity?
YES - Go to step 6.
NO - Go to step 11.
6. Reconnect the A/C pressure switch 2P connector.
7. Disconnect the climate control unit 20P connector.
8. Turn the ignition switch ON (II).
9. Measure the voltage between the No.2 terminal of the climate control unit 20P connector and body ground.
Is there about 5 volts?
YES - Check for loose wires or poor connections at the climate control unit 20P connector and at the A/C pressure switch 2P connector. If the connections are good, substitute a known-good climate control unit, and recheck. If the symptom/ indication goes away, replace the original climate control unit.
NO - Repair open in the wire between the climate control unit and the A/C pressure switch.
10. Using a Backprobe Set, measure the voltage between the No.27 terminal of the PCM connector A (32P) and body ground with the PCM connectors connected.
Is there about 5 volts?
YES - Repair open in the wire between the PCM and the A/C pressure switch.
NO - Check for loose wires or poor connections at the PCM connector A (32P). If the connections are good, substitute a known-good PCM, and recheck. If the symptom/indication goes away, replace the original PCM.
11. Check for proper A/C system pressure.
Is the pressure within specifications?
YES - Replace the A/C pressure switch.
NO - Repair the A/C pressure problem.