Tail Lamp: Service and Repair
Taillight ReplacementTaillights
1. Open the trunk lid and pull back the trunk side trim.
2. Disconnect the 6P connector (A) from the taillight (B).
3. Remove the four mounting nuts (C), then pull out the taillight (B).
NOTE:
- Inspect the gasket: replace it if it is distorted or stays compressed.
- After installing the taillights, run water over them to make sure they do not leak.
TURN SIGNAL/TAILLIGHT BULB: 27/7 W
BRAKE/TAILLIGHT BULB: 27/7 W
Inner Taillights
1. Open the trunk lid.
2. Remove the screw (D) and taillight lid cover (E).
3. Disconnect the connectors from the inner taillight (F).
4. Remove the mounting nuts then pull out the inner taillight (F).