Control Unit Input Test

Dash Lights Brightness Controller

Control Unit Input Test

1. Before testing dash light brightness control functions, troubleshoot the multiplex control system.

Multiplex Control Unit, Driver's:

2. Remove the driver's multiplex control unit from the driver's under-dash fuse/relay box.




3. Inspect all connector and socket terminals to be sure they are making good contact.
- If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
- If the terminals look OK, go to step 4.




4. With the control unit still disconnected, make these input tests at the connector and fuse/relay box socket.
- If any test indicates a problem, find and correct the cause, then recheck the system.
- If all the input tests prove OK, the control unit must be faulty; replace it.