Handling Wires and Harnesses

Handling Wires and Harnesses





* Secure wires and wire harnesses to the frame with their respective wire ties at the designated locations.
* Remove clips carefully; don't damage their locks (A).





* Slip pliers (A) under the clip base and through the hole at an angle, then squeeze the expansion tabs to release the clip.





* After installing harness clips, make sure the harness doesn't interfere with any moving parts.
* Keep wire harnesses away from exhaust pipes and other hot parts, from sharp edges of brackets and holes, and from exposed screws and bolts.
* Seat grommets in their grooves properly (A). Do not leave grommets distorted (B).