Front Door Window Glass: Adjustments
Front Door Glass AdjustmentNOTE: Check the weatherstrips and glass run channel for damage or deterioration, and replace them if necessary.
1. Place the vehicle on a firm, level surface.
2. Remove these items:
- Mirror mount cover
- Door panel
- Pull pocket bracket
- Plastic cover
3. Raise the glass (A) up as far as possible, and hold it against the glass run channel (B).
4. Loosen the roller guide bolts (C), and adjust the glass (A) so it is parallel with the glass run channel (B).
5. Tighten the roller guide bolts (C).
6. Loosen the front lower channel mounting bolts (A) and nut (B), then lower the glass (C).
7. Push the front lower channel (D) against the glass (C) while you tighten the mounting bolts (A) and nut (B).
8. Check that the glass moves smoothly.
9. Raise the glass fully, and check for gaps. Check that the glass (A) contacts the glass run channel (B) evenly.
10. Check for water leaks. Run water over the roof and on the sealing area as shown, and note these items:
- Use a 12 mm (1/2 in.) diameter hose (A).
- Adjust the rate of water flow (B)
- Do not use a nozzle.
- Hold the hose about 300 mm (12 in.) away from the door.
11. Reinstall all removed parts in the reverse order of removal.