Alternator

Alternator-compressor belt
Deflection with 98 N (10 kgf, 22 lbs.) applied mid-way between pulleys
Used belt 7.0 - 9.0 mm (0.28 - 0.35 inch)
New belt 4.0 - 6.0 mm (0.16 - 0.24 inch)
Tension (measured with belt tension gauge)
Used belt 490 - 590 N (50 - 60 kgf, 110 - 130 lbs.)
New belt 1,030 - 1,130 N (105 - 115 kgf, 231 - 254 1bs)

NOTE: Adjust a new belt to the new belt specification, run the engine for 5 minutes, then readjust it to the used belt specification