Rear Seat-Back

Rear Seat-back Cover Replacement

NOTE:
- Take care not to tear the seams or damage the seat covers.
- Put on gloves to protect your hands.

1. Remove the seat-back.
2. If equipped, remove the armrest and armrest frame.




3. Remove the screws, then remove the center belt guide.




4. Remove the clips then pull back the seat-back mat.




5. Release all the clips (A) and hook strips (B), and fold back the seat-back cover (C)




6. Pull back the edge of the seat-back cover (A) all the way around, and release the clips (B) and fasteners (C), then remove the seat-back cover. On a leather seat cover, there are no fasteners (C).
7. Install the cover in the reverse order of removal, and note these items:
- To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the fasteners, hooks and clips.
- Replace the released clips with new ones.