Rear Seat-Back Latch

Rear Seat-back Latch Replacement

NOTE:
- When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
- Take care not to bend or scratch the interior trim.

1. Remove these items:
- Seat side bolster, both sides
- Rear bulkhead cover




2. Disconnect the cylinder rod (A) from the trunk compartment.




3. Remove the bolts, then remove the seat-back latch.
4. Install the latch in the reverse order of removal, and note these items:
- Make sure the cylinder rod is connected securely.
- Make sure the seat-back locks securely and opens properly.