With Side Airbag

SRS components are located in this area. Review the SRS component locations, and precautions and procedures in the SRS section before performing repairs or service.

Manual With Side Airbag:

Disassemble the front seat as shown.

Reassemble the seat in the reverse order of disassembly, and note these items:
- Route the seat wire harness and recline cable correctly.
- Make sure the bushing and pivot washer are installed correctly.
- Apply multipurpose grease to the moving portion of the seat track.
- To prevent wrinkles in the seat-back cover, stretch the material evenly over the pad.
- Replace the back panel clips with new ones.
- If the seat-back pad or the OPDS unit is replaced, reinitialize the OPDS unit.