Operation CHARM: Car repair manuals for everyone.

Recall - Shift Interlock Repair: Overview

05-007

March 2, 2005

Applies To:
See VEHICLES AFFECTED

Safety Recall: Ignition Key Is Removable With the Shift Lever Out of Park

BACKGROUND

Limited batches of ignition switch interlock levers do not have sufficient surface hardness. An ignition switch with a defective interlock lever may wear excessively, making it possible to remove the key when the shift lever is out of Park. If the driver does not set the parking brake when parking, the vehicle could roll, and a crash could occur.

VEHICLES AFFECTED

Less than half of the vehicles within the affected VIN ranges are affected by this campaign. To verify eligibility, you must check at least one of these items:

^ The customer has a notification letter.

^ The vehicle is shown on your campaign responsibility report.

^ The vehicle is shown as eligible on an iN VIN status inquiry.

In addition to the bulleted verification items, check for a punch mark above the 15th character of the engine compartment VIN. A punch mark in that location means the key interlock has already been repaired.








Some vehicles affected by this campaign may be in your used vehicle inventory. According to federal law, these vehicles cannot be sold or leased until they are repaired. To see if a vehicle is affected by this campaign, do a VIN status inquiry before selling it.

CUSTOMER NOTIFICATION

All owners of affected vehicles will be sent a notification of this campaign. An example of the customer notification is at the end of this service bulletin.

CORRECTIVE ACTION

Inspect the interlock function of the ignition switch, and depending on whether or not the key can be removed, install the appropriate key interlock repair kit (A or B).








PARTS INFORMATION

REQUIRED SPECIAL TOOLS

NOTE:

^ Use the interlock tool kit (minus the gauge block) from Service Bulletin 03-088, Safety Recall: Ignition Switch key Interlock





If additional tools are needed, order them separately as listed.

REQUIRED MATERIALS

Permalube Grease (3-ounce tube):
P/N 08734-0030, H/C 7649320





WARRANTY CLAIM INFORMATION

Failed Part: P/N 35100-S84-A31
H/C 5435425
Defect Code: 5EE00
Symptom Code: P6800
Skill Level: Diagnostic Technician





Disclaimer