Standards and Service Limits
| Compressor (DENSO) | Starter coil resistance | at 68 deg F (20 deg C) | 3.05 - 3.35 ohms | |
| Pulley-to-pressure plate clearance | 0.5 +/- 0.15 mm | |||
| Compressor belt Adjust a new belt to the new belt specification, run the engine for 5 minutes, then readjust it to the used belt specification. | Deflection with 98 N (10 kgf, 22 lbs.) applied mid-way between pulleys | Used belt | 8.5 - 11.0 mm | |
| New belt | 5.0 - 6.5 mm | |||
| Tension (measured with belt tension gauge) | Used belt | 390 - 540 N | ||
| New belt | 830 - 980 N |